Blum Tool Co.
Products
       
 
  Block Planes
  Scraper Planes
  Mallets
  Sharpening Jigs
  Cabinetmakers Benches
  Portable Workbenches
       
 
Online Catalog
       
   
   
   
     
 
Antique Tools
       
   
     
Miscellaneous
       
 
  Contact Us
   
 
   

Scraper Planes

 

Our scraper frog will turn any of our bench planes into a scraper plane. The scraper frog can be purchased separately and changed out with a bench plane frog or can be purchased already installed in the plane in lieu of the regular frog.

Changing out a bench plane frog for a scraper frog takes about 2 minutes, so by purchasing one separately you have maximum versatility for your plane. Our scraper planes have all the adjustability of our bench planes, so it is the easiest scraper plane to set up.

The blade is removed and inserted through the bottom of the plane. The two outer setscrews tighten the blade in place. The center setscrew moves a bowing pin that bows the blade in the middle.

To Purchase:

Click Here to go to the Accessories section of the Bench Planes page.

The frogs are available separately or to buy a complete scraper plane, just buy the bench plane of your choice and then choose the Scraper Frog installed in plane accessory. Your plane will then come with the scraper frog  and blade installed in the plane in lieu of the planes normal frog. The price is the same as the bench plane.

Replacement Blades
.047 x 2" 0-1 steel blade $10.00
.047 x 2 1/4" 0-1 steel blade $10.00
Sharpening
The scraper plane blades are ground at 35°, so they are designed to be sharpened with our Fixed Angle Jig. Click Here  to go to our Sharpening Jigs page to purchase the 34/35° Fixed Angle Jig.

[Back to Top]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


[Back to Top]

Copyright © Blum Tool Company, All Rights Reserved.